Parts Finder

Or Shop By Brand

Select Brands

Savage - carbon fiber bolt handle (LH)

  • Brand: BoltKnobs.Com
  • Product Code: SAVHANDLE-LH-TIGHT
  • Availability: In Stock
  • $52.00

Savage Centerfire - left hand

For models 10, 110, 11, 111, 12, 14, 114, 16, 116 and the Stevens 200

Proudly designed and manufactured in the USA - see our website

A fully integrated carbon fiber bolt handle & knob for several Savage Centerfire models. No other rifle benefits more by replacing the original handle with our monocoque carbon fiber unit. The oversized cast steel options from Savage are excessively heavy. At an average of 1.2oz (34g), our unit is over 70% lighter than these factory handles at 4.2oz (120g)! - without making any compromises on strength, finish or quality. Using the same 1-piece carbon fiber handle from our Kimber 8400, this unit screws directly into a skeletonized bolt collar CNC machined from 4140 ordnance steel. We send these steel collars out for QPQ nitriding resulting in a high surface hardness and dry lubricity for a very slick movement over the rear baffle. Available in left-hand only.

Some fitting may be required

Minor modification of the steel collar may be required. With so many models and sub models of different vintages including more recently available aftermarket bolt-bodies, we have found that the dimensions between individual Savage rifles varies greatly. All our Savage handles are machined as a 'tight fit' only as indicated by the last diagram in the photo gallery. Some modification to these dimensions may be required when fitting depending on the tab measurements of your rifle's bolt body.

Fitting Guide

The handles are secured to the rear of the bolt body by a Bolt Attachment Screw ('BAS') - usually with a 1/4" hex head. Firmly secure your bolt in a well-padded vise. The existing handle can be removed from the bolt body by turning this screw counter-clockwise. Once removed, the carbon fiber handle will slot into place. If your bolt body dimensions are larger than usual, some trimming of our collar will be required (as detailed above). Apply a small amount of quality bolt grease to any surface modified along with the threads before reassembly.


  • Do not to stand on or place excess force the on the carbon fiber bolt handle when unscrewing the BAS! This can damage the aluminum threads inside the carbon fiber handle causing them to fail or loosen.
  • Always mount the bolt in a padded vise to disassemble or reassemble.
  • Please ensure you have ordered the correct bolt handle for your rifle (we manufacture left-handed and right-handed versions in both 'tight-fit' and 'factory-fit' variants)
  • Do not over tighten the large bolt screw when reassembling
  • We assemble the carbon fiber handle into the steel collar with a 'permanent' metal epoxy which has an advertised 4500 PSI strength once cured. We haven't designed the two pieces to be disassembled. If you have a requirement for individual parts, please contact us to discuss.

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: Savage 10, Savage 110, Savage 11, Savage 111, Savage 12, Savage 14, Savage 114, Savage 16, Savage 116, Stevens 200

Lumley Arms USA © 2022