Remington 870, 1100, 7600, and others - oversized safety

Remington 870, 1100, 7600 and others

Oversized safety (dome head)

This is a right-handed safety which fits all the models listed below, we also make a left-handed version on this link here. We include a replacement safety coil spring and a safety detent ball which enables owners with the 'ISS / J lock' locking safety to convert their trigger plates so no key is required (typically found on firearms made from 2002 to 2005). Designed for use with gloves or for when the small factory safety is difficult to engage. Machined from hardened 17-4 grade stainless steel and available as-machined (silver color) or with a tough DLC coating applied (black color). This is a durable safety that will never wear out, is highly-resistant to corrosion and has been made from the best materials with the best finishes applied. The deep serrations provide a very grippy surface for all weather conditions. We include a red color o-ring to indicate when the safety is disengaged and the firearm is ready to fire. This o-ring will glow very mildly in the dark after it has absorbed U.V. light for those shooters that use their firearms in low light conditions. A small pin punch is required for installation.

Remington
11-48
11-87
11-96
1100
552
572
740
7400
742
750
7500 (non detach mag)
760
7600
7615
870
878
Four (semi auto)
Six (pump)
SP-10
Sportsman 48
Sportsman 58
Sportsman 74
Sportsman 76

Remington 870 clones
H&R 1871 Pardner Pump
IAC Hawk 982
Norinco 98

Inclusions

• Oversized safety - left handed
  
• Spare o-ring
  
• Safety coil spring (stiffer - optional to install)
• Safety detent ball
• Retaining pin

Construction

• Safety - CNC machined from hardened 17-4 SS. Weighs 0.30 oz (8.4 g)
  
• Silver color version: supplied 'as-machined'
• Black color version: DLC coated
• Coil spring: spring steel, electroplated
• The 'ready-to-fire' position indicator is a photo luminescent silicone o-ring

Installation

We don't have instructions for products relating to triggers however the image gallery has renders showing how the components in this kit fit the trigger housing. If unsure on installation, we highly recommend having a qualified and competent gunsmith do the job. Always ensure the firearm is unloaded before commencing work and test that the safety functions exactly as it should upon reassembly whilst the firearm is unloaded. Be aware that the extra length and size that this safety provides will facilitate easier engagement allowing it to disengage, care needs to be taken when handling the firearm to ensure that this does not occur unexpectedly.