Lumley Arms
CZ SST - trigger spring (CZ 453, 527 and 550)
CZ 453, 527, 550Upgraded Spring for the CZ Single Set Trigger 'SST' (1 lb to 2.5 lbs)Fits rifles supplied to the USA and Australia only, will not fit some European market models This kit includes 3 trigger pull springs which are all the same and will deliver a safe and repeatable pull weight with an adjustable range from 1lb to 2.5lbs* when installed correctly**. Thes..
$15.00
Lithgow LA101 - bolt knob
Bolt Knob (M6 thread) Designed for the Lithgow LA101, also fits other rimfire riflesFrom Lumley Arms, this is a high strength replacement bolt knob for your Lithgow CrossOver LA101. Also fits other rifles with an M6 x 1mm thread however it is designed for a flush fit to the 9.06mm (0.357") diameter shoulder of the LA101's bolt handle - see the complete dimensions in the..
$26.00
Lithgow LA101 - titanium bolt shroud
Lithgow LA101 Titanium bolt shroudThis replaces the original plastic bolt shroud. Our version is CNC machined from aerospace-grade titanium alloy (Ti6Al4V) and skeletonized to reduce any excess weight. The bolt shroud is supplied with a hex-drive button-head retaining screw (also grade 5 titanium). The original design features of the factory shroud are largely retained ..
$49.00
Lithgow LA101 - trigger spring set
Lithgow LA101Trigger spring setGunsmith installation recommendedA new trigger spring set of two springs addressing both trigger pull weight and travel. These both replace the originals rated by Lithgow Arms at ~2kg (4.4 lbs). Our spring breaks cleanly and consistently with reduced creep at ~730g (1.6 lbs)* when installed correctly**. Some hand tools*** are required fo..
$15.00
Lithgow LA102 - DBM for AICS Magazines (7075-T76 aerospace alloy)
Lithgow LA102DBM for short-action AICS magazines, 7075-T76 grade aerospace alloy.Our DBM for the Lithgow LA102 is a durable replacement which accepts high quality AICS pattern magazines suitable for all factory 'short action' chamberings. This DBM eliminates the last major plastic component on the factory laminate and walnut stocks that utilize the Tikka T3 / T3x pattern m..
$169.00
Remington 700 and 722 - DBM for AICS magazines (316 SS)
Short Action DBM for AICS magazinesFits short action Remington 700, 722 and all custom / clone actions. Drop in fit for stocks with the Badger M5 inlet. If you are working on a custom build and are looking for the toughest DBM available - this is it.Read the REVIEW by all4shooters.comOur take on how the Remington 700 Short Action DBM should be made. Accepts any AICS short ..
$290.00
Remington 700 and 722 - DBM for AICS magazines (4140 steel)
Short Action DBM for AICS magazines - 4140 steelFits short action Remington 700, 722 and all custom / clone actions. Drop in fit for stocks with the Badger M5 inlet. If you are working on a custom build and are looking for the toughest DBM available - this is it.Read the REVIEW by all4shooters.comOur take on how the Remington 700 Short Action DBM should be made. Ac..
$279.00
Remington 7600 and others - 12ga forend adapter (hex nut)
Remington 7600, 7615, and othersForend adapter - enables 870 12ga shotgun forends to fit the following rifles:760 (late variation only)76007615Sportsman 76Six (pump)A high-quality CNC machined adapter kit which allows any 12ga, 870 shotgun forend within factory specifications to fit onto the Remington pump-action centerfire rifle models listed above. Later production model..
$69.50
Remington 7600, 7400, & others - magazine latch
Remington 7600, 7400 and othersExtended magazine latchFits the following Remington models listed below in all rifle calibers:74074007427507607600Four (semi auto)Six (pump)Sportsman 74Sportsman 76This kit includes our extended magazine latch and a replacement torsion spring. On older models such as the 760 and 740, our latch and torsion spring will replace the older Remin..
$29.00
Remington 870, 1100, 7600, and others - oversized safety
Remington 870, 1100, 7600 and othersOversized safety (dome head)This is a right-handed safety which fits all the models listed below, we also make a left-handed version on this link here. We include a replacement safety coil spring and a safety detent ball which enables owners with the 'ISS / J lock' locking safety to convert their trigger plates so no key is required (typ..
$29.00
Remington 870, 1100, 7600, and others - oversized safety - Left Handed
Remington 870, 1100, 7600 and others - Left HandedOversized safety (dome head)For left-handed shooters wanting to the reverse the direction of the safety for the right-handed models listed below, we also make a right-handed safety on this link here. The right-handed safeties on these triggers are not reversible without gunsmithing to the trigger plate. We incorporate all t..
$29.00
Remington 870, 1100, 7600, and others - trigger rebuild spring kit
Remington 870, 1100, 7600 and othersComplete trigger rebuild spring kitAlso fits the following models listed below, in all rifle calibers and all shotgun gauges: Remington11-4811-8711-96110055257274074007427507500 (non detach mag)76076007615870878Four (semi auto)Six (pump)SP-10Sportsman 48Sportsman 58Sportsman 74Sportsman 76Remington 870 clonesH&R 1871 Pardner P..
$19.00
Sako A7 - titanium recoil lug
Sako A7 Precision machined, titanium alloy recoil lug (Ti6Al4V)The Sako A7 is a well made rifle, sporting a super-slick action, quality hammer-forged barrels and a decent adjustable trigger. However they are let down by synthetic stocks and non-existent bedding. Most shoot fantastically out of the box, but in our experience they can shoot a bit better by correcting the po..
$29.00
/savage-bolt-lift-kit-new-1a-max-228.png "Savage - bolt lift kit (2019+ rifles)")
Savage - bolt lift kit (2019+ rifles)
SavageBolt lift kit - for newer production models 10, 110, 11, 111, 12, 14, 114, 16, 116 and others.Reduces bolt lift by 25% with our 'lower power' mainspring, test results are linked herePlease be aware that the OEM Savage mainspring #1 has changed since the release of the 2019+ production rifles. This replacement spring from Savage is stiffer and longer than what was ori..
$35.00
Savage - extractor and ejector kit (9 piece)
Savage CenterfireExtractor and Ejector kit - for models 10, 110, 11, 111, 12, 14, 114, 16, 116, Savage Ultralite, and the Stevens 200(sold exclusively in the USA by Tactical Works of Colorado)This is a high quality ejector and extractor kit for all Savage centerfire models based on the 10 / 110 action (not compatible with the Savage Axis). Made from the best materials with..
$28.00
Savage - titanium bolt body (Short Action, Right Handed)
Savage Centerfire bolt body for right-handed actions Fits all short-action variants of the model 10, 11, 12, 14, and 16 (does not fit the Axis).Note: a thick viscosity lubricant or bolt grease must be applied regularly to the cocking ramp (titanium) and bolt cocking pin (steel) to prevent galling between these indifferent metals.Designed for the shooter in pursuit of..
$95.00
Savage - titanium recoil lug (AccuStock & AccuFit compatible)
SavageTitanium recoil lug - AccuStock and AccuFit compatibleFor short and long action Savage models including the 10, 110, 11, 111, 12, 14, 114, 16, 116, and the Stevens 200Simply put - our titanium lugs are flatter, thicker and stiffer. Even with Savage's floating bolt head design and 3D bedding system, our lugs maximize the accuracy potential of these inherently accurate..
$39.00
Tikka and Sako - extractor and ejector kit
Tikka T3, T3x and Sako A7Extractor and Ejector kitThis is a higher quality and lower cost alternative to the original factory 'spare bolt parts' kit (Tikka reference: S5850240). There are six separate components to this kit. Our ejector, extractor and extractor plunger are CNC machined from tool grade stainless steel, which has been furnace hardened to HRC 35 (322 brinell)..
$45.00
Tikka and Sako - trigger housing springs
Tikka 558, 658, 590, 690, 595, 695, T3 and T3xSako 491, 591, 691, 75, 85, L461, L579, and L61RExternal trigger housing springsThis is a high quality replacement spring kit for your Tikka and Sako trigger housing assembly (external springs). This kit is useful to have on hand due to damaged or missing components and replacements can be difficult to obtain. The safety lever ..
$15.00
Tikka centerfire bolt shroud (Faceted)
Tikka Centerfire Bolt Shroud (Faceted)Fits the Tikka T3, T3x, M590, M595, M690 and M695Does not fit Tikka models M558 and M658The grey shroud is supplied bead blasted, it is not anodized. It may show remnants of tooling marks from machining. They are supplied this way for further finishing (cerakoting etc).CNC machined from high grade aerospace 7075-T76 alloy and availab..
$35.00
Tikka centerfire bolt shroud (Fluted)
Tikka Centerfire Bolt Shroud (Fluted)Fits the Tikka T3, T3x, M590, M595, M690 and M695Does not fit Tikka models M558 and M658CNC machined from high grade aerospace 7075-T76 alloy and available in either silver or black color options, this bolt shroud is the perfect complement for your lightweight Tikka Centrefire build. At 0.55oz (15.6g), our fluted shroud is almos..
$35.00
Tikka centerfire bolt shroud (Superlite)
Tikka Centerfire Bolt Shroud (Superlite)Fits the Tikka T3, T3x, M590, M595, M690 and M695Does not fit Tikka models M558 and M658CNC machined from high grade aerospace 7075-T76 alloy and available in either silver or black color options, this bolt shroud is the perfect complement for your lightweight Tikka Centrefire build. At 0.47oz (13.4g), our superlite shroud is..
$35.00
Tikka M558 and M658 - bolt shroud
Tikka M558 and M658 Bolt ShroudThis bolt shroud is a faithful reproduction of the now discontinued factory spare part made from 1989 to 1990 (Tikka reference: S5840244). We machine these from 4140 chrome moly steel then they are QPQ nitrided to a high surface hardness which produces a black color closely matching the blued finish on these rifles. Bolt shrouds are designed ..
$39.00
Tikka M558 and M658 bolt guide bushing
Tikka M558 and M658 Bolt Guide Bushing ("TIKKA-Bushing")Our bolt guide bushing is a high quality reproduction of the now discontinued factory spare part (Tikka reference: S5840242). The M558 and M658 are arguably the smoothest bolt action rifles of the entire Tikka range due to this component - an innovation for its time, however it was not to carry through to the M590 and..
$49.00
Tikka older models - bolt stop
Tikka M558, M590, M595, M658, M690 and M695Bolt release assembly ('bolt stop')This is a high quality replacement for the factory spare part that is no longer available. This bolt stop assembly corresponds to Tikka reference S5840255 and includes a replacement dowel pin and coil spring, which is everything needed to restore your Tikka to original condition. Our version is C..
$40.00
Tikka older models - recoil lug
Tikka M558, M590, M595, M658, M690 and M695Recoil Lug - stainless steel and skeletonizedThis is a bulletproof replacement for the factory recoil lug that maximizes the accuracy potential of the flat bottomed Tikka rifle actions made between 1989 and 2002 (Tikka reference: S584T299). These actions use an L-shape recoil lug originally constructed from aluminum alloy, our ver..
$32.50
Tikka older models - trigger guard parts kit
Tikka M558, M590, M595, M658, M690 and M695Trigger guard parts kit (includes magazine release lever)If your factory trigger guard is lost or broken, the link to the complete model in STL format (ready for 3D printing) is available at the top right of this page. These files include both the short action model for M558, M590, and M595 (Tikka: S5840175) and the..
$45.00