Savage - titanium BAS (2019+ rifles)

Savage

Titanium BAS (2019+ rifles)

For short and long action Savage models including the 10, 110, 11, 111, 12, 14, 114, 16, and 116

Proudly designed and manufactured in the USA - see our website www.BoltKnobs.com

This is a lightweight replacement BAS for your 2019+ Savage made from grade 5 titanium alloy (Ti6Al4V). We also produce a bolt lift kit for pre-2019 made Savage rifles with the old style firing pin linked here. The 2019 made Savage rifles don't have the bolt-lift issues typically associated with the older design. Available in either a grey or black color, our BAS uses the the best materials and coatings available achieving a high hardness and corrosion resistance coupled with weight reduction. These are very competitively priced and offer a lifetime of hard use in all environments. When combined with our titanium bolt handles (left or right) and titanium bolt bodies, substantial savings in weight can be achieved - see the comparison pictured in the image gallery.

Construction

• BAS (Grey color) - Ti6Al4V titanium alloy, glass bead blasted finish
• BAS (Black color) - Ti6Al4V titanium alloy, 'as-machined' finish with a DLC coating (PVD)

Specifications

• Weight = 0.36oz (10.2 grams)
  
• BAS hex socket = 1/4" hex key
  

Fitting Guide

Minimum tools required are a 1/4" hex key, if in doubt we recommend having a gunsmith fit the kit. Holding the bolt firmly with the BAS facing upwards in a padded vice is the easiest method. Be aware of the spring pressure before unscrewing the BAS. We recommend applying a small amount of bolt-lug grease or similar viscosity grease to the BAS threads prior to installation and decocking the bolt first then recocking following reassembly.