Remington 7600, 7615 and 870 - trigger spring kit
Remington 7600, 7615 and 870
Trigger spring kit
Also fits the following Remington models:
Made from quality spring steel wire and plated for both easy identification and to maximize corrosion resistance. This is a high quality set of two springs to fit most Remington pump and semi-auto rifles and shotguns which all use the same trigger assembly as pictured. If unsure on compatibility please contact us first to check. This kit currently includes two trigger pull springs shown below. We are planning to release more springs covering a wider range of pull weights for this kit sometime during 2021, the two springs available now represent the minimum and maximum pull weights. We measure the factory trigger at 4lb, the ratings below can vary slightly when fitted to different firearms* and when installed correctly**.
- Light ~1.25lb to 1.5lb (black color)
- Heavy ~5lb to 5.25lb (zinc color)
We have come across some very unsafe 1lb springs for this trigger assembly which although break at the advertised pull weight, will slam fire when working the action hard or when dropping the firearms onto the buttpad. Be vigilant with all trigger modifications and ensure you have a safe trigger - test thoroughly after reassembly! In our testing 1.25lb is the minimum pull weight that this trigger assembly will achieve by replacing the spring and polishing the sear and hammer. By replacing the trigger spring alone you can expect at best around 1.5lb in an unmodified trigger assembly.
* Results may vary slightly between individual rifles and shotguns and are dependent on the trigger pull gauge, factory tolerances and whether any other modifications have been done to the trigger. Our pull weight is measured using an RCBS gauge.
We supply replacement springs only. If unsure on installation, we
highly recommend having a qualified and competent gunsmith do the job.
Slight variations between different rifles and shotguns may result in an unsafe
trigger when fitting these springs. Always ensure the firearm is unloaded
before commencing work and test trigger function extensively upon
reassembly whilst rifle is unloaded. Slam closing the breech bolt and dropping
the rifle onto the buttpad (both whilst unloaded) is imperative.