Savage - extractor and ejector kit (9 piece)

Brand: Lumley Arms
Product Code: SAV-EX+EJ-KIT
Availability: Dealer exclusive

$28.00

0 reviews / Write a review

Or buy from a distributor:

Tactical Works 0 in stock

Wood2Stock 2 in stock

Savage Centerfire

Extractor and Ejector kit - for models 10, 110, 11, 111, 12, 14, 114, 16, 116, Savage Ultralite, and the Stevens 200

(sold exclusively in the USA by Tactical Works of Colorado)

This is a high quality ejector and extractor kit for all Savage centerfire models based on the 10 / 110 action (not compatible with the Savage Axis). Made from the best materials with the best finishes applied, this kit may resolve extraction and/or ejection issues that can occur with the factory Savage setup. There are nine separate components in this kit which incorporate all the parts contained within the Savage bolt head. We include two ejectors which have marginally different diameters to account for dimensional variations between factory and aftermarket bolt heads. We also include two different weight springs for both the extractor and ejector. These extra inclusions maximize the likelihood of the assembled bolt head functioning for the majority of vintages and chamberings. The extractor design is compatible with all factory chamberings, including cartridges with 0.390" rim diameters (204 Ruger, 222 Rem, 223 Rem etc).

Features:

Extractor machined from 17-4 stainless steel and to tighter tolerances than the OEM version (varies from silver to bronze in color)
Extractor Detent Ball made from 304 stainless steel and oversized
Extractor Springs (x2) made from electroplated piano wire, one standard strength and one extra strength
Ejector (0.0988" diameter) machined from 17-4 stainless steel with a TiN coating (gold in color)
Ejector (0.1" diameter) machined from 17-4 stainless steel, supplied as machined (varies from silver to charcoal in color)
Ejector Retaining Pin made from 316 stainless steel
Ejector Springs (x2) made from zinc-plated piano wire, one standard strength and one extra strength

Color variations of Ejectors and Extractors:

Our machined components included in this kit (the two ejectors and the one extractor) are vacuum heat treated to approximately 35 HRC hardness. As a result of this hardening process, colors vary between production lots. These variations are defined in the above section, and also shown in the image gallery.

Installation:

This kit is designed for trade use by gunsmiths and rifle builders. It is not designed as a 'drop-in' fit and extensively testing a combination of the included components in different configurations as well as modification to these various components may be necessary for your particular rifle / chambering / brass cartridge / bolt head. This kit might not resolve ejection or extraction issues and it may not function in your particular rifle due to one or more of these variables. We can provide general advice over email if provided with descriptions and photos - but a gunsmith may well be required for a successful installation. If you have installed this kit correctly and are still having difficulty ejecting and/or extracting cartridge cases, we recommend trying different brands of brass. If reloading ammunition, please examine your brass cartridges including the rim diameter and rim thickness to ensure they remain within SAAMI print specification. Inspection of the bolt face is necessary prior to installation for any visual signs of damage. If using an aftermarket bolt head, please measure the ID of the ejector hole and extractor detent ball hole to rule out any excessive lateral play from these components being the cause of any issues.